Double-side FPCB

Your Direct PCB & PCBA Manufacturing Partner

High-Density Interconnect PCB (HDI)
Home PCB Manufacturing High-Density Interconnect PCB (HDI)
HDI PCB Manufacturing | Prototype, Microvias & Volume Production | GemTech PCB

High-Density Interconnect PCB Manufacturing from Prototype to Production



GemTech PCB supports HDI PCB projects from engineering review and prototyping through volume production since 2016. 

GemTech PCB builds high-density interconnect (HDI) PCBs for demanding electronics across industries, especially AI computing PCB and drone electronics where multi-layer layouts push physical limits up to 28 layers. Our engineers take pride in solving tough HDI PCB manufacturing challenges—from upfront DFM production risk assessment all the way to mass production yield—by consistently executing narrow pads, fine line/space routing, resin filling, and blind, buried, stacked, staggered microvias, and via-in-pad structures. We have completed more than 3,000 HDI projects from prototype to mass production, and we are always glad to put that hands-on experience to work on your next extreme design.

Share your HDI board construction, Gerber data, material requirements and target schedule for a project-specific manufacturability review across prototyping and mass-production runs.

Precision MicroviasFine-Line RoutingDFM Review



HDI Parameter Summary

Summary reference values for prototyping and mass production are provided below to help you evaluate stack-up, via, fine-line, and mechanical expectations at a glance; for full process tolerances and site-specific limits, please review our dedicated capabilities page and confirm final build rules during engineering review.

Stack-Up, Fine-Line & Mechanical

Parameter Prototyping Mass Production
Max Layer Count 28 layers 18 layers
Finished Thickness 0.15–3.0 mm 0.20–2.4 mm
Min Dielectric Thickness 0.025 mm (25 μm) 0.025 mm (25 μm)
Inner / Outer Copper 0.25–4 oz 0.25–3 oz
Min Trace Width / Spacing 30 / 30 μm 35 / 35 μm
Min BGA Pitch / Pad 0.25 mm / 0.13 mm 0.30 mm / 0.15 mm
Impedance Tolerance ±5% ±8%
Warpage / Panel Size ≤0.30% / 500×280 mm ≤0.50% / 500×280 mm

Microvias, Drilling & Finishes

Parameter Prototyping Mass Production
Min Blind Via Diameter 0.05 mm 0.06 mm
Min Buried / Through Hole 0.10 mm 0.12 mm
Laser Via Aspect Ratio 1:1 0.8:1
Max PTH Aspect Ratio 12:1 10:1
Min Resin-Plugged Hole 0.15 mm 0.15 mm
Max Resin Plug Aspect Ratio 16:1 12:1
Via-in-Pad (POFV) Available — confirm design Available — confirm design
Surface Finishes OSP, ENIG, ENEPIG, immersion silver, lead-free HASL, selective finishes

HDI Interconnect Structures & Review Points

Choosing the wrong HDI interconnect structure on dense AI computing PCBs or drone electronics either chokes BGA escape routing or adds unnecessary lamination cycles and volume yield risk. Use the HDI interconnect structure matrix below to match blind via, buried via, stacked microvia, staggered microvia, and via-in-pad (POFV) builds to your layer stack-up—and see which copper-fill, resin planarization, tolerance, and microsection acceptance criteria our engineers verify during DFM review.

Structure Typical Design Role Key Engineering & Fabrication Checks
Blind Via Surface-to-inner fan-out and layer reduction Laser via diameter, target-layer pad size, aspect ratio, and cross-section criteria
Buried Via Internal-to-internal connections freeing outer routing Sub-stack lamination order, plating reliability, resin fill where needed, and inspection
Stacked Microvia Vertical multi-layer capture in tight BGA zones Stacked tier count, copper-fill completeness, pad registration, and reliability testing
Staggered Microvia Offset inter-layer transitions with internal routing Stagger offset, via-to-via spacing, layer transitions, and microsection acceptance
Via-in-Pad (POFV) Direct pad-level routing for fine-pitch components Drill size, resin plug and planarization, copper cap integrity, and pad coplanarity

HDI PCB Materials & Application Checks

Before you lock your PCB BOM and fabrication drawing, we evaluate HDI PCB materials against signal frequency, low insertion-loss targets, stack-up construction, thermal limits, delivery schedule, and end-use inspection requirements. Checking high-frequency signal loss, thermal stability, and material lead times upfront keeps you from re-releasing drawings or getting stuck on specialty laminate availability mid-build.

[ INSERT MATERIAL PHOTO — Megtron 6 ]

Megtron 6

High-speed, low-loss laminate option. Confirm exact grade, thickness, and stack-up with engineering.

[ INSERT MATERIAL PHOTO — RO4350B ]

RO4350B

High-frequency laminate option for RF and microwave board constructions.

[ INSERT MATERIAL PHOTO — FR408HR ]

FR408HR

High-performance FR-4 material option. Confirm electrical and thermal design requirements.

Automotive HDI PCB

For ADAS and EV electronics, define operating temperature, vibration exposure, copper balance, stack-up, traceability, and required automotive quality documentation.

Medical HDI PCB

For portable monitoring and diagnostic electronics, review compact routing, test access, material traceability, cleanliness requirements, and inspection records.

Telecommunications HDI PCB

For 5G, high-speed, and RF designs, confirm laminate grade, dielectric data, controlled impedance, insertion-loss targets, backdrill needs, and coupon/TDR requirements.

Aerospace HDI PCB

For space- and weight-constrained electronics, document material controls, environmental requirements, inspection criteria, and program qualification rules before release.

Consumer Electronics HDI PCB

For compact electronics and fine-pitch BGA designs, review escape routing, microvia structure, solder-mask registration, board thickness, and assembly constraints.

Semiconductor Test PCB

For test interface and high-density test boards, specify pad pitch, flatness, routing density, impedance targets, connector interfaces, and signal-integrity requirements.

HDI Quality Checks, Production Stages & Equipment

HDI PCB (High-density interconnect PCB) inspection methods, build progression, and key equipment areas are aligned with your drawing, stack-up, and qualification plan so prototype validation and volume fabrication stay consistent.

[ INSERT QUALITY / INSPECTION PHOTO ]
  • IPC-2226 design requirements — where specified
  • IPC-6012 acceptance class — confirm applicable revision and class
  • Microsection and plated-hole inspection
  • Electrical continuity and isolation testing
  • TDR / impedance coupon testing where specified
  • IST, CAF and thermal cycling when included in the qualification plan
01DFM Review
02Prototype Build
03Process Validation
04Volume Production
05Repeat Orders
[ INSERT PHOTO — Laser Drilling ]

Laser Drilling

[ INSERT PHOTO — Sequential Lamination ]

Sequential Lamination

[ INSERT PHOTO — AOI Inspection ]

AOI Inspection

HDI PCB Case Studies

Representative HDI board constructions and application focus areas provide practical reference examples for high-layer-count, compact routing, and industrial control builds; exact project scope and specifications are confirmed during engineering review.

[ INSERT CASE PHOTO — AI Computing Board · 40612 ]

AI Computing Board · 40612

14-Layer | 6-N-6 HDI

High-density interconnections for AI hardware, deep-learning accelerators, and FPGA-based computing.

Read Case Study ↗
[ INSERT CASE PHOTO — Drone Mainboard · 43147 ]

Drone Mainboard · 43147

8-Layer | 2-N-2 HDI

Compact integration for flight control and RF image transmission.

Read Case Study ↗
[ INSERT CASE PHOTO — Industrial Controller · 32768 ]

Industrial Controller · 32768

6-Layer | 1-N-1 HDI

Compact multilayer construction for industrial automation and embedded control systems.

Read Case Study ↗

HDI PCB Manufacturing FAQs

What information is needed for an HDI PCB DFM review?

Provide Gerber or ODB++ data, drill files, stack-up, material requirements, impedance notes, board outline, quantity and target schedule. Include controlled drawings and acceptance requirements where applicable.

Can HDI PCB prototypes move into mass production?

Prototype-to-production transfer is subject to design review, material availability, process validation, inspection requirements and confirmation that the production route can maintain the approved construction.

Which HDI microvia structures can be reviewed?

Blind vias, buried vias, stacked microvias, staggered microvias and via-in-pad structures can be evaluated against the submitted stack-up and fabrication data. Confirm the specific structure and dimensions with engineering.

Can Megtron 6, RO4350B and FR408HR be used?

These materials are listed in the supplied page content. Confirm exact grade, thickness, availability, stack-up compatibility and project qualification before specifying them in a purchase order.

Which quality documents can be supplied?

Available documents depend on the agreed product specification and factory scope. Request the applicable inspection report, electrical test result, material documentation and certificates during quotation.

Upload Gerbers for DFM & Quote

Send your HDI PCB files and project requirements for engineering review.

Upload Gerbers →
Technical information on this page must be confirmed against the current manufacturing site capability, approved materials, quality scope and project-specific engineering review.

Get Expert Support

Our team will get back to you within 24 hours


DFM & Design Review

Technical Consultation

Fast Response

How can we help you?
Name*
Email*
Company Name*
Address
Job Title
Phone Number
Message
Upload Gerber/PCB File:
Send Message
Name*
Email*
Company Name*
Address
Job Title
Phone Number