Your Direct PCB & PCBA Manufacturing Partner

When a board design moves from layout into fabrication, our engineering and quality teams review manufacturability risks before production starts, verify key process stages, and maintain board-level traceability records where specified.
Jump directly to pre-production engineering review, process verification, nine-stage records, or compliance.
We check stack-up construction, via ratios, impedance targets, and thermal paths before tooling release so buildability and cost trade-offs are addressed early.
Review high-density interconnect layer construction and microvia aspect ratios against fabrication limits.
Evaluate controlled impedance targets and thermal dissipation paths prior to production release.
Flag layout and process risks early—aligned with the over 90% prototype risk review reference in source notes.
In-line optical inspection, lab testing, and electrical verification are applied across defined production steps based on product requirements and quality documentation.
AOI and AVI stations scan etched circuitry and solder mask surfaces to catch opens, shorts, and residual copper.
Thermal shock, micro-sectioning, and ionic cleanliness follow IPC-TM-650 methods to verify plating and bonding.
Automated flying-probe and fixture tests verify continuity and isolation; source notes state ±8% impedance tolerance.
Supports IPC-6012 Class 3 where applicable and links MES/IIoT data within the 15-year digital record reference.
Linking lot, equipment, parameter, and inspection data to a unique board serial number keeps each board identifiable after singulation without affecting circuit operation.
Organizes records to support audits and frameworks such as IPC-1782 when specified.
Traces a board ID back to material lots, machine settings, and test logs when investigating issues.
Narrows containment to affected lots or boards instead of treating unrelated stock as suspect.
Supports multi-year or long-lifecycle record lookup for industrial and medical programs.
Select a stage below to view the material lots, process parameters, and inspection records linked at that step.
We directly link supplier details, material lot numbers, receiving dates and incoming inspection data for copper foil and laminate materials.
For HDI, thin, and small-form-factor boards, marking method and placement are matched to available board area and singulation rules.
Keep serial codes clear and scannable after routing or depaneling into individual boards.
Match marking method and code size to minimum board dimensions, tight keep-outs, and HDI/thin-board geometry.
Supply-chain declarations and traceability depth are aligned with project specifications, regulatory requirements, and target cost tiers.
We track RoHS 2.0 and REACH SVHC updates and maintain required material and third-party traceability records per batch of laminate and process chemistry.
Our team will get back to you within 24 hours
DFM & Design Review
Technical Consultation
Fast Response